A Professional of Cast-in-place Pile Construction Work, Shinmei Gikou and Shimei Techno

AC method

HomeAC method

This is Hammer Grab Soil Removing method using All Casing method.

NETIS Registration No. QS-130012-A
Novelty and
expected benefits
①What kind of novelty does it have? (What was improved compared to conventional technology?)
  1. By installing shell's opening and closing device at the external side of the main body, the volume of the excavated soil in its container was expanded.
  2. By increasing the weight of the main body, its excavating power was improved.
  3. Enabled the attachment of removable counterweight.
② What are its expected benefits? (What are the advantages of using its new technology?)
  1. By expanding the volume of the excavated soil in its container and increasing the weight of the main body, the volume of the excavated and removed per cycle soil will increased.
  2. By increasing and decreasing the counterweight, effective handling will be enabled according to ground condition (soil property, retained water in the casing and so on)
  3. By improved construction efficiency, the reduction of construction expenses and time is achieved.
Applicable ranges ① Applicable ranges
  1. Soil property: visicosity soil/ clay soil, sand and sandy soil, rudaceous soil, round stones, soft rock (I) (Has been applied to N value 50 of Soft Rock Type I or the like)
  2. Applicable diameters: φ1000, φ1200, φ1500 and φ 2000mm
  3. Digging length: Max. 50 m (Our longest record is 54.6 m)
②Applicable ranges, which are especially effective
  1. Soft ground
  2. Excavation of underwater
  3. Site which requires a reduction of construction time
③Non applicable range
  1. Soft rock (II), medium-hard rock, hard rock
Points of concern In construction
  1. When the level of the water retained in the casing is high, or when there are any hard soil in the middle of the casing, to Adjust the counterweight.
  2. Since the weight is increased, operating radius of crawler crane and other points should be reviewed.
AC method
Contact Us

Phone

+81-92-408-4108
Inquiry form